Fachverlag x-technik
search
  • thumbnail

    content type : Sandvik Coromant

    Predictive maintenance of driven tool holders

    Coromant Capto® DTH Plus driven tool holders are equipped with sensors. Data is presented to operators through a software application. This way, it is possible to predict the maintenance need of your driven tool holder...   
    Video ansehen >>

  • thumbnail

    content type : Sandvik Coromant

    Performance in challenging operations - CoroDrill 860 GM

    CoroDrill® 860 with -GM geometry is a high-performance multi material drilling solution for short holes. It is primarily focusing on ISO P, M, K and H materials. It performs competitively in ISO-N and ISO-S materials...   
    Video ansehen >>

  • thumbnail

    content type : Sandvik Coromant

    CoroDrill 860 GM - Optimized for multi material

    CoroDrill® 860 with -GM geometry is a high-performance multi material drilling solution for short holes. It is primarily focusing on ISO P, M, K and H materials. It performs competitively in ISO-N and ISO-S materials...   
    Video ansehen >>

  • thumbnail

    content type : Sandvik Coromant

    Milling a robot mask - Sandvik Coromant

    Robo-Bob, as we fondly call this guy, was produced for a robot exhibition at the Technical Museum in Stockholm. The mask was produced by Sandvik Coromant with inserts and tools made in the world's largest production...   
    Video ansehen >>

  • thumbnail

    content type : Sandvik Coromant

    CoroMill® Plura Insights Broadcast: Episode 6 - Influence of the spindle speed

    In this broadcast series we take a look at how to use CoroPlus® Toolguide to get a secure and productive solution for your milling operations with solid carbide end mills. Select the right milling strategies, with the...   
    Video ansehen >>

  • thumbnail

    content type : Sandvik Coromant

    M5F90 milling cutter – one shot roughing and finishing

    Demo film presenting M5F90. This is a concept face-milling cutter that enables roughing and finishing of thin wall automotive aluminium components in a single operation   
    Video ansehen >>

  • thumbnail

    content type : Sandvik Coromant

    CoroMill® Plura Insights Broadcast: Episode 5 - End milling with long overhangs

    In this broadcast series we take a look at how to use CoroPlus® Toolguide to get a secure and productive solution for your milling operations with solid carbide end mills. Select the right milling strategies, with the...   
    Video ansehen >>

  • thumbnail

    content type : Sandvik Coromant

    Super finishing face milling cutter for aluminium - M5B90

    Demo film presenting M5B90, finishing face milling concept developed for automotive aluminium components such as cylinder heads, blocks, housings, covers and all components with a wide material engagement   
    Video ansehen >>

  • thumbnail

    content type : Sandvik Coromant

    M5C90 – one shot face milling cutter for aluminium

    Demo film presenting M5C90. This is a concept face milling tool for high speed direct finishing of aluminium automotive parts such as cylinder heads, cylinder blocks, and all aluminium parts within wide cutter...   
    Video ansehen >>

  • thumbnail

    content type : Sandvik Coromant

    Demo of design-automated combination boring - CoroBore® BC

    This demo shows tailor made CoroBore® BC, design-automated combination boring for semi-finishing and chamfer boring applications. With a customized solution one tool can be used for multiple operations and save tool...   
    Video ansehen >>

  • thumbnail

    content type : Sandvik Coromant

    CoroMill® Plura Insights Broadcast: Episode 4 - Thread Milling

    In this broadcast series we take a look at how to use CoroPlusToolguide to get a secure and productive solution for your milling operations with solid carbide endmills. Select the right milling strategies, with the...   
    Video ansehen >>

  • thumbnail

    content type : Sandvik Coromant

    M5R90 milling cutter – for roughing and semi-finishing of aluminium automotive parts

    Demo film presenting M5R90. This is our first choice for roughing to semi-finishing in shoulder milling operations of automotive aluminium components such as cylinder blocks, cylinder heads, transmission...   
    Video ansehen >>

  • thumbnail

    content type : Sandvik Coromant

    M5Q90 milling cutter – for first stage roughing operations in aluminium

    Demo film presenting M5Q90. This milling cutter cleans the surfaces of newly casted aluminium cylinder heads and engine blocks in one smooth operation, without burring.   
    Video ansehen >>

  • thumbnail

    content type : Sandvik Coromant

    Profiling with long overhangs in narrow grooves - CoroCut® QD

    CoroCut® QD, a secure parting off and deep grooving tool, is now available with the well-known geometry -RM. This round geometry allows profiling with long overhangs in narrow grooves, the possibility to use non-linear...   
    Video ansehen >>

  • thumbnail

    content type : Sandvik Coromant

    Deep hole drilling demo – CoroDrill® DS20 4-7xD

    An indexable insert drill with optimized grades and geometris, a flexible modular drilling interface, new flute design and a rigid tool body. Watch this demo film to find out more about CoroDrill® DS20 4xD-7xD. Learn...   
    Video ansehen >>

  • thumbnail

    content type : Sandvik Coromant

    CoroMill® Plura Insights Broadcast: Episode 3 - High feed sidemilling

    In this broadcast series we take a look at how to use CoroPlusToolguide to get a secure and productive solution for your milling operations with solid carbide endmills. Select the right milling strategies, with the...   
    Video ansehen >>

  • thumbnail

    content type : Sandvik Coromant

    CoroMill® Plura Insights Broadcast: Episode 2 - Pocket milling

    In this broadcast series we take a look at how to use CoroPlusToolguide to get a secure and productive solution for your milling operations with solid carbide endmills. Select the right milling strategies, with the...   
    Video ansehen >>

  • thumbnail

    content type : Sandvik Coromant

    CoroMill® Plura Insights Broadcast: Episode 1 - Heavy Duty machining

    In this broadcast series we take a look at how to use CoroPlus® Toolguide to get a secure and productive solution for your milling operations with solid carbide endmills. Select the right milling strategies, with the...   
    Video ansehen >>

  • thumbnail

    content type : Sandvik Coromant

    EMO 2019: Navigate the machining change

    Solutions that are not only productive, but quick to implement? Fact-based decisions in production? For Dr. Niklas Kramer, Sandvik Coromant Stand Manager at the EMO 2019, these are key factors in meeting the exciting...   
    Video ansehen >>

  • thumbnail

    content type : Sandvik Coromant

    How to monitor machining and track machine tool utilization

    Machine tool and cutting tool monitoring is an easy and effective way to increase productivity in the workshop. Markus Eriksson, Business Development Manager, uses monitoring solution CoroPlus MachiningInsights to...   
    Video ansehen >>

  • thumbnail

    content type : Sandvik Coromant

    Silent Tools™ Plus damped turning solution explained

    Learn how to overcome difficulties of internal turning by using connected turning solutions. In this film, Mathias Tjomsland, Software Product Manager, explains what Silent Tools™ Plus digital machining solution is...   
    Video ansehen >>

  • thumbnail

    content type : Sandvik Coromant

    How to generate tool path and export NC codes for turning

    CoroPlus® ToolPath for PrimeTurning™ provides the quickest way to generate tool path and export NC codes for turning in order to speed up your operations and planning processes. Available in stand-alone and...   
    Video ansehen >>

  • thumbnail

    content type : Sandvik Coromant

    Silent Tools™ Plus digital machining solution

    The connectivity of Silent Tools™ Plus adaptors enables visualization of data directly from inside the component, during the machining process. This leads to better decision-making and increased efficiency. Click...   
    Video ansehen >>

  • thumbnail

    content type : Sandvik Coromant

    How to customize cutting tool solutions online

    How to order customized cutting tools – This video demonstrates how to easily configure and order a cutting tool to fit specific manufacturing requirements, using an online customizer” For more information about...   
    Video ansehen >>










Zentrale

Sandvik Coromant ist Teil der globalen Unternehmensgruppe Sandvik und Weltmarktführer für Werkzeuge und Zerspanungslösungen. Mit seinem Know-how setzt das schwedische Unternehmen Industriestandards und treibt die für die metallbearbeitende...
mehr

Niederlassungen

  • flag of be Sandvik Coromant Region Europe
  • Fountain Plaza - Belgicastraat 5 Bus 5/6
  • B-1930 Zanventem
  • Tel. +32 02-702 98 00
  • www.sandvik.coromant.com