ISCAR TIP TALK - ISCAR Drilling Heads for Flat Bottom Holes

Hi everyone and welcome to Tip Talk from ISCAR's Tech Center! Shallow flat bottom holes are very common in different parts such as holes for screw heads, washers & springs. Which is the fastest way to produce shallow flat bottom holes? ISCAR's MULTI-MASTER exchangeable flat bottom drilling heads are the answer. With a 1.2 depth to hole diameter ratio, these heads provide excellent performance and significant economic advantages over solid carbide endmills. The MULTI-MASTER exchangeable flat bottom drilling heads also ensure efficient drilling on slanted and curved surfaces and can be used directly on solid material without centering or pre-drilling. This makes then an ideal solution for producing partial holes, counterboring and spot facing. When drilling slanted surfaces with these heads, is it necessary to reduce the feed rate. It is estimated that the feed rate reduction should be between 30-50% of the common value, depending on the angle of inclination. Iscar offers a complete range of MULTI-MASTER exchangeable flat bottom drilling heads. Check our catalogue to learn more about machining intelligently. #ISCAR, #HoleMaking, #Drilling, #MultiMaster, #FlatBottomHoles,