External Rough Turning DOVE_IQ-_TURN HEAVY DUTY LINE Rough turning is characterized by high D.O.C. 4-10 mm (0.157-0.393") and high feed rates 0.4-1.0 mm/rev (0.016 -0.0393 ipr). Large single-sided inserts are used to withstand interrupted cut and high machining load. For more information: https://www.iscar.com/newarticles.aspx/countryid/1/newarticleid/1528 https://www.iscar.com/newarticles.aspx/countryid/1/newarticleid/179 #ISCAR, #INDUSTREALIZE, #OilAndGas, #RockBits, #ExternalRoughTurning
Quattrotec Intelligent turning applications with new EasySafe System Pentatec, the universal turning-drilling tool, already replaces up to five ISO tools and reduces machining times by up to 30% as tool changing times and unnecessary tool movements are eliminated. The innovative, revolutionary Quattrotec tool system is the next step in this intelligent machining concept, and the new EasySafe fitting system with a notch constitutes yet another major advantage of this product. With the introduction of the new Quattrotec tool system, Austrian carbide and tool specialist Boehlerit makes it possible for users to drive down costs further, in an even broader material range. Thanks to the special design of the base body, four machining operations – drilling into solid material (including off-centre drilling), inside turning, face cutting and longitudinal turning – may be performed with low vibrations and just a single tool. The EasySafe system is the uncontested highlight of the Quattrotec: A notch on the underside of the indexable insert ensures that it can be fitted into the seat speedily and 100% correctly. Easy to install, safe to use! In a tried-and-tested, highly diverse range of grades, Boehlerit combines substrates of different levels of hardness, with either a wear-resistant CVD coating or a universal, process-safe PVD coating. The Kapfenberg-based tool specialist uses different carbide substrates that are coordinated in such a way as to achieve optimised machining properties. The market launch at the EMO in Hanover already saw no less than six directly pressed grades, and two more ground varieties for non-ferrous metals will be added in the next development phase. This means that the optimal cutting material will be available for almost every application. The innovative Quattrotec tool programme reduces machining and tool changing times, saves tool places and makes it possible to drill flat-bottomed blind holes. At the same time, this highly stable tool system that was developed from scratch also offers improved process safety and increases efficiency and flexibility during application. Quattrotec – explore new paths with Boehlerit!