Tools for deburring and milling! - CrazyMill Chamfer

The CrazyMill Chamfer from Mikron Tool provides a full set of tungsten carbide deburring and milling cutters in the diameter range of 0.36 to 6.0 mm (.014” to .236”). • The CrazyMill Frontchamfer for front deburring and chamfering in the diameter range of 1.0 mm to 6.0 mm (.0394" to .236") reaches even difficult-to-access locations because of its ingenious geometry and exhibits a constant, positive cutting behavior over the entire cutting edge. • The CrazyMill Backchamfer in diameters of 0.36 mm to 5.7 mm (.0142" to .224") is used for back edge deburring or hole deburring even in the smallest dimensions without unclamping the workpiece. Usable length: 3 x d and 5 x d. • The CrazyMill Doublechamfer in the diameters of 0.9 mm to 5.7 mm (.0354" to .224") allows to deburr edges and difficult-to-access locations front and back with just one single tool. Usable length: 3 x d and 6 x d. • CrazyMill Radiuschamfer for universal usage in the diameter range of 1 mm to 6 mm (.0393" to .236") is suitable for front and back chamfering as well as for all possible internal and external contours and intersections of holes and milling procedures. Usable length 4 x d. The solid carbide deburring tools offer the ideal tool for chamfering and deburring for difficult-to-machine materials. Whether steel o stainless steel, cast iron, non-ferrous metal, or titanium. They reach top-level performance when it comes to chamfering and deburring in small dimensions, difficult materials, and hard-to-reach locations. They can be utilized at high feed rates and result in first-class surface quality absolutely burr free. The tip geometry is designed to prevent secondary burrs. Read more! CrazyMill Chamfer: https://www.mikrontool.com/en/Products/CrazyMill-Chamfer/Description ➨Find your right tool: https://www.mikrontool.com/en/Tool-finder More about Mikron Tool Homepage: https://www.mikrontool.com/en Crazy Tools: https://www.mikrontool.com/en/Products/Crazy-tools Crazy Services: https://www.mikrontool.com/en/products/crazy-services/general-information Follow Mikron Tool LinkedIn: https://ch.linkedin.com/company/mikron-tool Contact Mikron Tool https://www.mikrontool.com/en/Contact-Locations/Local-Contacts