Expert quartet turning, miling, chamfering and grooving!
31.07.2023 · ZCC Cutting Tools ·
Teilen:
·
Drucken
ZCC-CT Europe knows it all!
ZCC Cutting Tools Europe GmbH
https://www.zccct-europe.com/
Competence turning: CNMG120408-XM YBC103
Chip breaker: XM
Grade: YBC103
Vc= 260m/min
Ffacing= 0.25 mm/rev
d.o.c.= 1.5 mm
fturning= 0.35 mm
d.o.c.= 3.0 mm
Added value:
• Low cutting forces at high feed rates due to positive rake angle
• Excellent chip control at low cutting depths due to optimally positioned
chip breaker
• Reinforced cutting edge to reduce chip induced damage
Cost-effective milling: FMP17-050-A22-S12-05C
Milling system: FMP17
Insert: SNGX1205PNN-GM YBG205H
Vc= 280 m/min
fz= 0.12 mm
ap=5 mm
ae= max. 12.5 mm
Added value:
• This 88° milling system with negative inserts ensures a stable cutting
edge
• Wide range of applications for roughing and finishing
• The newly developed chip breakers create a positive insert geometry
with lower cutting pressure
Quality chamfering: 5601R904FM-0800 KDG303
Chamfer mills: FM series
Diameter: 8 mm
Point angle: 90°
Vc= 250 m/min
fz= 0.02 mm
ap= 0.2 mm
Added value:
• Available with 4 and 6 cutting edges and with 60°, 90° and 120°
point angle
• Suitable for linear deburring or chamfering of workpiece edges and
circular contour machining
• Compatible for general machining
Productivity Grooving: Modular grooving System zFlex
Insert: ZRFD03-MG YB9320
Vc = 250 m/min
fturning = 0.6 mm/rev
ap = 0.36 mm
Added value:
• Flexibly assemble components consisting of a basic holder, basic
cassette and a primary cassette
• It can be used for any grooving operation
• Due to the specially developed spring tension of the primary cassette,
no plastic deformations occur even after multiple clamping operations
Teilen: · Drucken